deli T313 Split Comb Binding Machine Instruction Manual

Product Structure & Components

1. Manejar
2. Comb plate
3. Pull ring plate
4. Pull selector
5. 5Locating block
6. Pull ring handle
7. Punching margin control
8. Caja de chatarra de papel

Consumable Specification Recommendations

Instrucciones de uso

1. La máquina se usa para perforar hojas de papel y plástico, y el clip de plástico se usa para encuadernación de hojas sueltas. La máquina solo se puede usar para este propósito y utilícela de acuerdo con las instrucciones de operación.
2. Antes de perforar los materiales originales, recuerde usar papel de desecho para probar si la máquina funciona normalmente.
3. Vacíe el contenedor de residuos periódicamente.
4. El número límite superior para punzonado es 20, y este número no debe excederse.

Punching Steps

1. Set the locating block at the desired position. Turn the knob counterclockwise to loosen. Turn it clockwise to fasten.
2. Turn the punching margin control to set the edge margin.
3. Pull out and disengage the proper punch selector when punching odd-sized documents.
4. Push paper into the punching channel. Pull the handle all the way down until it stops to punch completely through. Pull the handle up completely and remove the punched paper.

Pasos vinculantes

1. Place the rubber ring behind the comb-shaped plate and move the rubber ring to the left with the opening facing upwards.
2. Rotate the pull ring handle clockwise to open the rubber ring and then put the punched file onto the rubber ring.
3. Rotate the pull ring handle counterclockwise to remove the file.

Troubleshooting and Common Fault Analysis

Parámetros del producto

• Espesor máximo de punzonado: 20 sheets of paper (80g A4 paper)
• Binding edge distance: 2-5 milímetros
• Hole Size and Pitch: 3mm × 8mm, 14.3mm pitch
• Especificación vinculante: A4 size paper or smaller
• Espesor máximo de encuadernación: 450 hojas
• Peso neto: 6.35 kilogramos
• Dimensiones del dispositivo: 405 mm × 315 mm × 380 mm

Tarjeta de garantía

Gracias por la compraasing our products. The interests of customers who purchase our products will be protected. For any malfunction due to product manufacturer quality issues, please contact authorized local dealers or service centers with this receipt and the warranty card.

Términos de garantía:

1. For product failures occurring under normal operating circumstances, free of charge repair and spare parts replacement services shall be provided by our company within one year commencing from the date of purchase.
2. Customers are required to present this warranty card and the original purchase invoice to our company upon requesting warranty service. This warranty card shall be valid only after the following form is filled out in detail and affixed with the official seal of the dealer.
3. No se prestará ningún servicio de reparación gratuito en caso de que concurra alguna de las siguientes circunstancias:
   1. Expiración del período de garantía;
   2. Daños ocasionados por uso inadecuado, mantenimiento o almacenamiento no conforme con los requisitos del manual del usuario;
   3. Falla o daño resultante de desmontaje, reparación o modificación no autorizados;
   4. Fallo o daño causado por fuerza mayor;
   5. Wear parts or consumable accessories.

This warranty card is delivered with the product (one card per product). Please keep this warranty card in a secure place to claim free warranty service. It will not be replaced if lost.

Warranty Registration RecordsDate of Purchase: ______ Year ______ Month ______ Day

(Dealer Copy: This copy shall be cut along the dotted line and retained by the dealer.)