LTECH KMS1 Switch Module
Introducción del producto
- Fully supports major smart home ecosystems including Apple Home, SmartThings, Google Assistant, and Amazon, enabling unified management across platforms.
- Built-in Thread module, compatible with the Matter protocol, supports Siri, Google, and Alexa voice control.
- Supports OTA firmware updates to continuously receive the latest features and security patches, ensuring long-term device stability.
- Parameter settings for switch type and power-on status can be completed via the NFC Lighting App.
- Reserved mechanical switch/reset switch interface accommodates both traditional operating habits and smart scenario requirements.
Especificaciones técnicas
| Modelo | kms1 |
|---|---|
| Tipo inalámbrico | Materia sobre hilo |
| Cambiar canal | 1 canales |
| Vol de funcionamientotage | 100-240 V~, 50/60 Hz |
| Max. load parameters of the relay | Resistive load: 1000W@230Vac, 500W@110Vac Capacitive load: 400W@230Vac, 200W@110Vac |
| Sobrecorriente de relé | 70A@10ms |
| Temperatura de trabajo | -25 °C ~ 50 °C |
| Tamaño del producto | Largo 45 × Ancho 45.5 × Alto 20.5 (mm) |
| Peso del producto | 38 gramos |
| Normas | UL 8750, EN 61347-2-13:2014+A1:2017, EN 61347-1:2015+A1:2021, EN 62493:2015/A1:2022 |
Imágenes del producto
DIMENSIÓN
- Unidad: mm
- Dimensiones: 45 x 45.5 x 20.5
Diagrama de cableado
- Mechanical Switch Wiring Diagram
Includes connections for load, line (L), and neutral (N).
- Push Switch Wiring Diagram
Includes connections for load, line (L), and neutral (N).
Utilice la aplicación de iluminación NFC
Scan the QR code with your mobile phone and install the APP as prompted. Compatible with iOS 13 or above and Android NFC-enabled models.
Read the Device
Click “Read/Write LED driver” in the APP [home page], place the sensing area of the phone near the NFC identification point of the driver, and read the device parameters.
Editar parámetros
Click “Parameter Management” to select the switch type. When selecting a reset switch, you can configure the device’s power-on state function.
Add to Matter Platform Instructions
- This device supports control via major smart home platforms, including Apple Home, Amazon Alexa, Google Home, Smart Things, and others.
- To connect Matter over Thread devices, prepare a Matter hub supporting Thread border router functionality from major platforms.
Modelos compatibles
Configuración Example
- This guide uses Apple Home as an example. Prepare an iPhone (iOS 16.2 or later) or iPad (iPadOS 16.2 or later) with the latest firmware, along with an Apple HomePod mini also running the latest firmware. Connect your iPhone or iPad to your home Wi-Fi network, launch the Apple Home app, and follow Apple’s instructions to set up the HomePod mini.
- For iPhone models 15 and above, no Matter hub is required; they can be added directly.
Añadir accesorios
- Open the Apple Home app and tap “Add or Scan Accessories.” Add the device to Apple Home by scanning the QR code sticker on the device.
- *You can also activate service via NFC: Simply hold your iPhone 16 or later model near the device’s NFC sensor area to be recognized and activated.
Dispositivo de control
After successfully adding the device to Apple Home, tap the device icon to turn it on or off.
Funciones avanzadas
Supports creating groups, scenes, and automations, as well as remote control and scheduled control. Devices can also be controlled via Siri voice commands.
Restaurar configuración de fábrica
Reset Button Reset
Press and hold the reset button for 15 seconds until the indicator light flashes red rapidly, then release. Within 3 seconds, press the reset button three times briefly. The red light will then switch to slow flashing, indicating the device has begun restoring factory settings. When the indicator light flashes blue rapidly, the restoration is complete.
Reinicio de encendido
En caso de un corte de energíatage, use the switch to power on the device for 15 seconds before powering it off. Repeat this power cycle six times consecutively (each cycle consisting of 2 seconds on and 5 seconds off). After the seventh power cycle, the load lamp will flash three times, indicating a successful reset to factory settings.
Atención
- La instalación y puesta en servicio del producto debe ser realizada por un profesional calificado.
- Our company products are not waterproof or lightning-proof (special models excepted). Please avoid the sun and rain. When installed outdoors, please ensure they are mounted in a waterproof enclosure or in an area equipped with lightning protection devices.
- Una buena disipación de calor prolongará la vida útil de los productos. Asegúrese de que haya una buena ventilación.
- Por favor, compruebe si el volumen de trabajotagEl utilizado cumple con los requisitos de parámetros de los productos.
- El diámetro del cable utilizado debe poder cargar los artefactos de iluminación que conecte y garantizar un cableado firme.
- Antes de encender los productos, asegúrese de que todo el cableado sea correcto en caso de una conexión incorrecta que provoque daños en las lámparas.
- Si ocurre una falla, no intente reparar los productos usted mismo. Si tiene alguna pregunta, póngase en contacto con sus proveedores.
Acuerdo de garantía
Períodos de garantía a partir de la fecha de entrega: 2 años. Se proporcionan servicios gratuitos de reparación o sustitución por problemas de calidad dentro de los períodos de garantía.
Exclusiones de garantía
- Más allá de los períodos de garantía.
- Cualquier daño artificial causado por alto vol.tage, sobrecarga u operaciones incorrectas.
- Productos con daño físico severo.
- Daños causados por desastres naturales y fuerza mayor.
- Las etiquetas de garantía y los códigos de barras están dañados.
- No contract signed by our company.
Documentos / Recursos
 |
LTECH KMS1 Switch Module [pdf] Manual del propietario KMS1 Switch Module, KMS1, Switch Module, Module |