Manual del usuario del interruptor de relé SwitchBot 2PM

SwitchBot Relay Switch 2PM

Especificación

• Firmware Versión1.0
• Hardware Versión0
• Certificado IDCSA2463BMAT44270-24
• Certificado Fecha10/09/2024
• Producto ID0x07ef
• Proveedor ID0x1397
• Cumplimiento Documento Download Compliance Document
• TIS/TRP Tested: Sí
• Especificación Versión1.0
• Interfaz de transporte Wifi
• Primary Device ID de tipo0x000E

Características principales

1. Dual Control: Relay Switch 2PM has two independent channels, allowing control of two devices simultaneously, like lights or sockets.
2. Power Monitoring: It monitors real-time power consumption, helping optimize energy use. Historical data is available through the app.
3. Wi-Fi Connectivity: No extra hub needed; it connects directly to your home Wi-Fi for remote control.
4. Scheduling and Scenes: Supports timers and custom scenes for automated operations, enhancing convenience.
5. Voice Control: Compatible with Alexa, Google Assistant for hands-free control.
6. Overload Protection: Protects against overheating and overload for safe operation.

Relay Switch 2PM is ideal for lighting, appliance control, and energy monitoring, offering a flexible smart home solution.

Advertencias de seguridad

1. Never perform installation or maintenance while powered; always disconnect power before operation.
2. Avoid use in humid environments to prevent short circuits.
3. Do not operate beyond rated load capacity to avoid equipment damage.

INFORMACIÓN DEL PRODUCTO

• Nombre del producto Relé de conmutación
• Marca NO

Instrucciones de uso

1. Verify correct wiring connections before powering on.
2. Press the switch to activate the device; the indicator light illuminating indicates normal operation.
3. When turning off the switch, disconnect power first before operation.

Precauciones

1. Ensure secure and stable mounting during installation to prevent loosening.
2. Do not disassemble the housing arbitrarily, as this may impair performance.
3. Avoid exposure to high temperatures and strong magnetic fields.

Función sobreview

1. Controls circuit on/off to enable automated operation.
2. Provides overload protection to ensure equipment safety.
3. Delivers rapid response to enhance operational efficiency.

Solución de problemas

1. Failure to start: Check whether the power supply is connected.
2. Indicator light not illuminating: May indicate internal wiring failure.
3. Slow response: Clean dust accumulation or verify whether load exceeds the rated capacity.